Search results

===Blue Room=== The 'Blue Room' is a tiny room that is inaccessible in gameplay. It is close to 0,0,0

::''parm2'': blue :Sets the red/green/blue/alpha shader parms on the light and the model.

::''parm2'': blue :Sets the red/green/blue/alpha shader parms on the light and the model.

::''parm2'': blue :Sets the red/green/blue/alpha shader parms on the light and the model.

blue global4 blue 1.0 // tune blue illumination

===By Blue-Dot Surface Choice and Texture Browser=== ...will be applied to all surfaces of the selected object, in addition to the blue-dot surface(s).

* '''<nowiki>{{blue|Your blue text goes here}}</nowiki>''' => {{blue|Your blue text goes here}}

* You now have a working text decal, seen in DR as a blue rectangular "Entity GUI". ^4 bright blue

...st the colour. You can tweak that. For example, gaslight might be slightly blue and torch light slightly orange but it's easier to do it in the light inspe ...lour so different ambient lights might illuminate a crystal grotto as pale blue; a lava cave with a ruddy glow, and so on. But unless you have special need

Looking at the pic we have some green lines. These are the portals. The blue line WILL be a portal for stage 2, right now it is just a caulk wall to sea Select the last wall in the map (Blue line in Stage 1 pic) and make it a vis-portal. Now for easy of use 'filter'

** Blue with checkmark icon = this Layer is currently visible ** Blue with star icon = this Layer is currently visible, and "active", i.e., newly

blue global4 blue global4

blue Parm2 blue Parm2

...make the yellow skull, when it's the current inventory item, pulse with a blue tint. (This will not affect how the skull appears in the inventory grid, no ...// "Pulse" feature. Momentarily reduce red & green channels to make blue tint

''Clip Selection'' will cut the brush and delete the part you cut off. The blue is the cut plane and everything on the side of the blue will be deleted.

blue Parm2 blue Parm2

maps/blue.map ...ning a three-mission campaign consisting of the maps <tt>red.map</tt>, <tt>blue.map</tt> and <tt>green.map</tt>, in this order.

...al cutoff textures, only red channel of the texture matters. The green and blue channels are used for additional precision beyond 8 bits. If you decide to inspect these maps, better mask off green and blue channels in your image viewer, and look only at the red channel, since it c

...e Theatre, the dimensions are more flexible here, so perhaps your existing blue room in the void could be outfitted for the purpose. blue 1

# Create a 'blue' room (a room not accessible by the player) and store all items intended fo ...the above adding every single weapon; the startpack includes a ready made blue room with every tool and weapon but for now it's just important you underst

...onger a Mod]''''' (11 October 2013) - Article on the standalone release by Blue's News.

...ile of a fountain between two buildings. Red is the origin light direction Blue is the bounce direction.]] blue Parm2 * 2

The city watch are recognizable by their blue tabards with the white eagle symbol on the chest. They frequently wear a k Criminal nicknames for a member of The City Watch include "Blue-coat" and "Eagle".

The most common ones will be green, red and blue: * '''<font color="#000099">blue</font>''' means that the file has been marked for addition. It will be uplo

When you import this prefab into Dark Radiant, you will see only a blue "Entity GUI" rectangle. In the next step, you're going to throw away that r ...the overlay is not embedded in the sign, you can alternatively resize the blue "Entity GUI" patch in DR to achieve the same ends.)

As you can see from the icon (the blue is what you get) you will get caps on each side of the arch that fill in th ...s at the end (this might vary depending on which you are doing yours.) The blue arrow in the image indicates this added section will be bent in that direct

...r and frontmost rectangle is 40w x 6h, with "Nodraw Solid" texture, except blue "Entity GUI" applied and fitted to front surface. This surface will show th // Same ratio as blue Entity GUI surface of 40w x 6h

set "Debug::Text" "Time 0 – Normal to Blue Tint"; set "Debug::Text" "Time 400 – Blue Tint to Normal";

...ting it to the surface with Surface Inspector, this will appear in DR as a blue rectangle with "Entity GUI" text. If you look into the material's descripti ...y evident in DR (except for the effect on a subtle brown border around the blue Entity GUI), but at runtime.

...ddle of my vertical seam. To fix that, I'll just offset, and paint in some blue on my edited brick layer back in the original document. ...round to making our stone wall look like a stone wall, instead of deformed blue circus peanuts floating uniformly in the dead of space.

* the overall bounds as a green/blue box ...disambiguate abutting glyphs. Green for top & left edges (sharing s & t), blue for right & bottom (s2 & t2).

...rst, make a layer above your new light grey backdrop, then go down to your blue bricks layer, and {{key-ctrl}}+{{LMB}} the icon on the tab to select your i ...rick to fix that. Make a new layer, and fill it with the default normalmap blue of R-128 G-128 B-255...

...control points of the botton patches, closing the gap. As indicated by the blue circles in the picture, you need to line up all additional border control p ...reate whatever shape (keeping the "merged" points together, as seen in the blue circles).

...are no different. If your campaign consists of three missions ("red.map", "blue.map" and "green.map"), all three of them still go into the same maps folder ...he PK4 (just next to the readme.txt). Following the example of the "red", "blue" and "green" maps above the map sequence file would look like this:

...ne and then green in the next etc), for example making it more red or more blue etc. This can be useful if you have a leaf texture and want to make 2 mater

// Optionally add code here to move player to blue room. // Optionally add code here to move player from blue room.

|''A magical, extinguishable torch flame, moving shadows. Blue tint and bluish smoke.'' |''A lit wall-mounted, square electric lamp with spiky antenna on top, white-blue in colour. Can be toggled on/off when linked from a switch.''

red = 0, green = 1, blue = 2, cyan = 3, pink = 4, white = 5+

Oddly, when I change the colour of the box above from black to blue, the grey border didn't appear.

The blue channel is, from the perspective of an artist, unimportant so you don't rea

...ng before this tutorial. Close up you may see it is covered in a checkered blue 'shader not found' message. Don't worry if it's covered in something else l

...fault. It could be as simple as changing the colour of an AI's tunic from blue to green, or a totally new texture that changes the clothing entirely (thou

...colours, shows the number of lights hitting a surface, black = 0, red = 1, blue = 2... etc.

* default ''(blue & white dress)''

...ish color. This can be useful for a lava cave. Other examples are slightly blue light for moonlit outsides, greenish cast for caves or underwater areas etc

* Set the ambient colour in Light Inspector to Red, Green, Blue of 0, 25, 25 (= 0.00, 0.1, 0.1 in Entity Inspector) for a dull greeny hue.

* MaterialStage.ColourComponent.'''BLUE'''

...window you should now see your greyscale image has been converted probably blue looking with depressions, eg inverted the heights; that's OK.

...lable items in the shop of your map place an atdm:shop entity somewhere (a blue room maybe).

|Used by Ambient Texture Method - Blue channel

** all items in the Group will be in "blue-dashed-line overlay", rather than "red-dashed-line overlay" of a selected E

...ndependently toggled on or off with LMB. Any that are "on" (indicated by a blue filter funnel icon) will hide the corresponding map items in all DR views.

...f the func_static segment of the VP penetrating brush is short enough. The blue worldspawn brushes could also be monsterclipped func_statics as well. If so

...(colors shows the number of lights hitting a surface, black = 0, red = 1, blue = 2... etc),

...fadeColor" specifies which color, and how transparent in RGBA (red, green, blue, and alpha, ranging from 0-1). Default is fade to black: "fadeColor" "0 0

...nd the name '''atdm:liquid_water_1''' (or similiar). It should also have a blue outline in the orthographic view (The XZ Front in this case).

...has the attachement name 'flame' to "0.2 0.2 09", thus coloring the light blue.

blue global4

Colours are defined r,g,b,a being the amount of red, green, blue components and degree of transparency, each in the range 0 to 1. So 1 1 1 1

* "Blue-coat" -- slang for a member of [[the City Watch]].

...e to whatever color is selected in your color swapper. Like say you have a blue section you want to paint red, but still keep your shading, and variation o

:blue=0.082

The entity appears as a blue box of size 16x16x16 in DR. It comes with three script functions.

windowDef blue

Once you added your files, TortoiseSVN will mark your files with a small blue plus sign, which indicates that they will be uploaded to the repository the

* Added blue version of the flame elemental.

...screen should fade. Every number represents the intensity of red, green or blue color.

...sts of 3 numbers, often used for 3D movements (x y z) or colors (red green blue). It must always have single quotation marks. Example: '0 90 0'

blue 0.3

...addition and will be considered during the next commit. Note that a small blue plus sign has been added to the file symbol (if you don't see it, hitting F

The blue boxes are path_waits. They should have wait 0 and the angle spawnarg remove

# click "file" (menu) > "open in powershell" and a blue window will appear.

blue global4

You should see on the TV screen: bright yellow spots on blue background; moving, merging, and splitting.

...er encloses it in a rectangular box. Drag any of the box corner "handles" (blue dots) with a mouse to enlarge or shrink it symmetrically. The chosen-handle

'''Note''' that links to existing pages will appear {{blue|blueish}}, while links to non-existing articles will appear in {{red|red}}.

* new colored torch flames: blue, green, orange

* ^4 bright blue

2. BREATH INDICATOR: When you are underwater, a small blue bar will appear above the lightgem. This bar shows how much air you have le

blue global4

* Select the WHOLE brush. The red/blue translate arrows should show on it

...". Green dots will show at each vert. When you select a vert, it becomes blue (you can select and move more than one at a time). Hit "esc" to exit vert

...ttp://bugs.thedarkmod.com/view.php?id=2747 #2747]: Crashes after a "Doom 3 Blue Window" type of game shutdown (Coding) (greebo)

|Blue value set by [[_color]] spawnarg in the editor

...llowing scenario, a bar (slave) is bound to a plate (master). The force F (blue) is here show as two forces F_X and F_Y, acting on this

...n '''DXT5 RXGB''' format with the colour weighting of '''red=0, green=0.5, blue=0.5''' and '''"adaptive" disabled'''.

...spawnarg consists of three space-separated color values for red, green and blue. Each is expressed as a decimal fraction of range 0.0-1.0. The spawnarg set

The red box drawn around the object is the player collision model, the blue box is the combat model.

...he lightgem is a breath indicator. When the player is under water, a small blue bar appears above the lightgem. The bar shows how much air you have left an

blue global4

...n on the left. Set the water level and press update maps. You'll see light blue colors in areas with water. Set the levels so that you've realistic looking

...ip between a character and its backing white rectangle. (TIP: turn off the blue channel, so pixels appear in yellow, easier to distinguish from grey checke