Starting to Model for TDM

From The DarkMod Wiki
Jump to navigationJump to search

Modeling Software

Most modelers on the team use Lightwave or Blender. Anything that can save in either .lwo (prefered) or .ase format is acceptable, however. There is an ASE exporter available for Blender at the Doom3World forums, otherwise ask somebody in the Dark Mod Forums. 3dsMax can be used to model and import/export .ase files.

Making the Model

You will need to make, for each individual object:

  • a highpoly model. There's no poly limit to this--make it as detailed as possible.
  • a lowpoly version of the same size and basic shape (see dimensions below).

The detailed version is used, by Doom 3, or another tool such as ORB or xnormals, to generate a normalmap with all the details on it. This normalmap is then used with the lowpoly model to fake higher detail. See Renderbump for more information on using D3 to generate normalmaps.

  • Lightwave: Your model needs to be tripled before being used in game (SHIFT+T), or D3 will spit out tons of warning messages.
  • Blender: The ASE exporter will automatically convert all your faces to triangles.
  • 3dsMax: turn to poly, max sides 3, turn to edit mesh before export.

Model and Texture Dimensions

Aim for approximately 5000 polys for significant AI, and less than 500 for most common objects. Generally, objects that might only be used once in a scene (like a well) can have higher polys, but objects that might appear many times (like lights or chairs) should have less than 500. Round objects (vases, plates, etc) should have a minimum of 8-10 sides (depending on the size of the object) to appear fairly smooth. Less important parts of an object (like the legs of a stool) can have fewer sides to keep polys down.

About 200-250 polys is the average for most smallish size props, like weapons or lights. Even our wide bookshelf model is less than 250 polys, so it's not always dependent on size.

If you can do it for less, that's great, but you don't generally need to sacrifice detail just to get a model less than 200 polys.

Texture sizes go in powers of two: 2, 16, 32, 64, 128, 256, 512, 1024, 2048. D3 will automatically rescale TGA textures that are not in powers of two, which could stretch your texture and waste processing time. Note that the dimensions of DDS textures absolutely have to match powers of two, otherwise they appear black in-game.

Naming Conventions

The following convention should be used for naming all new model additions to TDM (many existing models do not follow this convention, and over time effort will be made to update them). The goal is consistency among names based on ordered characteristics, and this convention is also shared with material names. Obviously some descriptors which apply for materials may not apply for models.

  1. Object Type descriptor first. As a model is an object, this descriptor is mandatory. It's a window, a door, a chest...
  2. Material descriptor next. Optional. Remember that skins might exist. Made from marble, wood, mud...
  3. Size descriptor next. Optional. It is large, small...
  4. Quality descriptors next. Optional. Remember that skins might exist. Texture-wise, it is rough, new, cracked...
  5. Color descriptors next. Optional. Remember that skins might exist. What color is it? red, green...
  6. Number Increment next. Mandatory. Which of the list is it? 001, 002...

If establishing precedent (creating a new Size descriptor, e.g., "huge"), try to avoid ambiguity and unnecessary overlapping with other descriptors (e.g., "enormous"), and set a good example others will follow.


Examples:

1. chest_001

This name omits all but the mandatory descriptors. If valuable information about the object can help differentiate it from others, optional descriptors may be added. If it is indeed generic, this name is fine.

Why is this preferred? Some existing models are named by other than Object descriptor first. Since the Editors sort models into lists based on the filename, sorting is made useless in this case, and the user is forced to search all models manually.


2. door_wood_battered_005

This highly descriptive name omits a Size descriptor and a Color descriptor.

Why is this preferred? Some existing models are named by quality descriptor first (e.g., 'battered_door...'). This is an inconvenience for the user, because they were looking for a 'door', not a 'battered'.


It should be noted that a given descriptor could be double-stage if needed, for example, lamp_wall_ (uses two object descriptors), as long as it either follows precedent or establishes a good one. In this case, care should be taken not to trample over the next-in-line descriptor for existing items (e.g., lamp_woodlandforest conflicts with sorting of lamp_wood), nor to separate the object from those with which it belongs.

Where to Save your Model and Textures

Models should be saved in the models/darkmod tree. See Model Folder Structure for specific information about where to put things.

Grid Alignment and Origin

Please make sure your models are grid-aligned (the bottom of the object rests on a grid line in your modelling software). If they don't, it can be difficult to get the model to sit on the floor or other surfaces in the editor.

Re: Origins. D3 uses the origin of the model to determine physics for movement--moveable objects will rotate around the origin when they are bouncing around. Any model that will likely be made into a moveable object (basically any unattached object smaller than a chair) should have its origin where its center of gravity would be.

Large objects that are not likely to be moveables, like desks or wardrobes, can have their origin at the bottom of the object, for easy placement on the floor.

An exception would be something like trees that an author might possibly sink into the ground far enough to reach outside the world. In this case have a centered origin would be best so the origin stays inside world.

Objects that might be designed to swing or rotate (like a hanging sign) should have their origin at the point of rotation.

Collision Meshes

Collision models should be used on most objects for several reasons. They can help simplify pathfinding databases for AI and weapons, they also simplify the shape of the object so it can be moveable. If an object is going to be static and not move, like a pillar, it's collision model can be as complex as you want, however this defeats the purpose of a collision mesh. Generally you want to make the collision mesh as simple as possible while retaining the basic shape of the model. This will guaranty that arrows will bounce off of it, or stick to it in a realistic way. If the mesh doesn't match the original object close enough you will get things like arrows bouncing off the air next to the model, or arrows that go through the model.

Collision models must be exported with the original object mesh. This makes them hard to see in the editor, but the collision surface can be toggled so it's not a problem. Collision meshes won't be seen in game, nor will their effects if done properly.

A static object can use one or more collision models, the purpose of this is to apply different materials to the colllision model. For instance, the generic Doom collision sounds like stone when an arrow bounces off of it, and arrows will always bounce off of it. However Dark Radiant allows the use of material specific collision shaders. So a chest can be made of metal and wood, an arrow will bounce of the metal parts and stick into the wood parts. The number of collision meshes on a static object is undetermined but should be limitless. This is a good way to simplify collision while retaining the objects material types. A collision model overrides an objects shader properties (the image will be the same but noise and collision props will not work), so if you export with collision try to seperate it into materials.

Examples of collision shader names: //base/tdm_collision_wood, //base/tdm_collision_ceramic

Moveable objects must have collision models unlike static objects. These meshes have to be very simple. Currently the exact specs of a moveables collision mesh are under debate. You will often see these specs stated as less than 16 polys, no concave polys, ect... But it is possible to make workable collision models with both of the above rules broken, however it is very unlikely and you are lucky if it works. Most of the time if you do break those rules you will get an unstable mesh that will fly across the room when frobbed, sometimes even resulting in SHAS (Sudden Heart Attack Syndrom) when the player dies without warning. So sticking to those guidlines is usually best and can still result in a decent collision model in most cases. Multiple collision meshes have been successfully exported also, however they only use the material type of the first collision model loaded, this can also lead to instability. Generally simple shapes work best, just try to make it fit your object as close as possible.

Shapes that work well for moveable collision models are cubes, pyramids and cylinders (up to 7 sides seems to work well). An L-shape of 2 collision meshes has proven to work with chairs (basically 2 cubes).

For an idea what will work look at models in the model viewer. Of course a crate has a cube, a gear will have a cylinder, a lamp might have a pyramid. Objects that use unconventional shapes that defy the rules above are keys and the silver teapot.

Shadow Meshes

Shadow meshes are similar to collision meshes. Basically they are just to simplify shadow casting, this can have great benefits to maps, especially if there are multiple lights hitting the object. Doom 3 can handle an enormous amount of polys on screen without flinching, however throw in a couple lights and you can bring it to its knees. This is where the importance of shadow meshes really counts. Doom3 calculates how each triangle is hit by a light and what shadow that triangle will cast, this is no big deal with one triangle, or one light.

We have done tests with 100,000 polys and one light, FPS will be around 60. Add a second light and the FPS will drop to 45, add a 3rd light and FPS will drop to 30 (rough estimates)... So if your objects are 100,000 polys but your shadow meshes only equal 50,000 polys you have already cut the lag in half.

All materials and/or objects (including game created func_static meshes) can have noshadows set to 1. While this really helps performance it can look very bad and have bad effects on gameplay. Darkmod is a game set in very shadowy places and the player uses shadows for stealth, the major gameplay component, hence the importance of shadow meshes once again.

When modeling the shadow mesh try to match the basic shape of your object as close as possible while using as few triangles as possible. Say you have a pipe object that has 20 sides and is very round. You could make a shadow mesh with only 4 sides and for the most part the shadow would look the same, the noticable difference would be that the ends would cast sharp corners, but often times these can be hidden within another shadow and wont be noticeable in game at all.

Shadow meshes must be exported with objects and their collision models. Unlike collision shaders the shadow shaders do not override the objects shadows. So when making a model that uses a shadow mesh you need to use material shaders for the object with noshadows on it, this has to be set in the material file (materials/.mtr). However do not go and start adding noshadows to all the materials as some objects or terrain might need shadows. Instead copy/paste the shader deffinition into a new .mtr file, give it a new name and add noshadows to it, that way the original material doesn't change. You should also use NoSelfShadow which will stop the material from casting shadows on itself.

There are 2 material shaders for shadow meshes, they can be combined and both used for one model at the same time. They are //base/shadow and //base/shadow2. Shadow material casts shadows and self shadows (on the object the mesh is exported with, it is all considered one object although the collision and shadow meshes are not seen in game). Shadow2 casts shadows (on terrain and other objects) but does not cast shadows on itself. This is very handy for things like apples where the player really won't notice if the stem casts a shadow on the apple. Remember, this is one of the most important considerations for performance so if an object can live without shadows, or casting shadows on itself then use that option first.

Weird lighting issues due to shadow meshes. .Ase files from 3ds max have an issue with shadow meshes clipping outside of an objects mesh which can cause weird shadow fragments on the objects they belong to. The cure for this is to make sure that the shadow mesh is entirely inside the objects mesh. If it sticks out anywhere you will get a weird shadow. A workaround I have found that works good is to model large parts of a shadow mesh that are easy to hide, this can cut down alot of shadow casting polys on an object. Then I will split small details off of the object and give them a material that has shadows, then I don't have to mess with the very hard areas but have still done some good. (example: a small pot with tiny handles, the pot will cast no shadows but will have a shadow mesh to do that, The tiny handles will themselves cast shadows so there is no weird shadow mesh clippling - both use the same base material, but the noshadows and noself shadow lines are removed from a copy of the original shader). There seems to be no issue with lwo files, I am not sure why this is, but if you are making these files it seems you can be a bit more lax in the overall shape/clipping of your shadow mesh.