DDS creation: Difference between revisions

From The DarkMod Wiki
Jump to navigationJump to search
No edit summary
Line 1: Line 1:
This quick guide will describe the steps you'll have to follow in order to create DDS files suitable for use in your Dark Mod maps and how to convert from DDS to other image formats using "[http://www.dramthethief.com/darkmod/files/ATI_Compressonator_v1.21.zip The Compressonator]". DDS files are a lot smaller than the uncompressed TGAs, often around 15% of the size. The greatest benefit of this is seen in performance and the benefit of using higher res textures.  
This quick guide will describe the steps you'll have to follow in order to create DDS files suitable for use in your Dark Mod maps and how to convert from DDS to other image formats using "[http://darkmod.taaaki.za.net/tools/ati_compressonator_v1.21.zip The Compressonator]". DDS files are a lot smaller than the uncompressed TGAs, often around 15% of the size. The greatest benefit of this is seen in performance and the benefit of using higher res textures.  


It is strongly suggested that while you are creating and adjusting your texture that you should use TGA until you are ready to release it and then compressing the relevant images to DDS for release.
It is strongly suggested that while you are creating and adjusting your texture that you should use TGA until you are ready to release it and then compressing the relevant images to DDS for release.
Line 23: Line 23:


==Converting Image To DDS==
==Converting Image To DDS==
You'll need [http://www.dramthethief.com/darkmod/files/ATI_Compressonator_v1.21.zip ATI's "The Compressonator" application version 1.21.1044] with this exact version - other versions might work for diffuses and speculars, but for compressing DXT5 RXGB normalmaps this is the only version that works. Install/unzip it to a folder and create a shortcut if you like.
You'll need [http://darkmod.taaaki.za.net/tools/ati_compressonator_v1.21.zip ATI's "The Compressonator" application version 1.21.1044] with this exact version - other versions might work for diffuses and speculars, but for compressing DXT5 RXGB normalmaps this is the only version that works. Install/unzip it to a folder and create a shortcut if you like.


=== Compress Diffuse/Specular Maps ===
=== Compress Diffuse/Specular Maps ===

Revision as of 08:15, 6 July 2015

This quick guide will describe the steps you'll have to follow in order to create DDS files suitable for use in your Dark Mod maps and how to convert from DDS to other image formats using "The Compressonator". DDS files are a lot smaller than the uncompressed TGAs, often around 15% of the size. The greatest benefit of this is seen in performance and the benefit of using higher res textures.

It is strongly suggested that while you are creating and adjusting your texture that you should use TGA until you are ready to release it and then compressing the relevant images to DDS for release.

Guidelines for DDS Textures

Due to these reasons it is strongly recommended that you compress both diffuse and specular textures. Normalmaps should however not be compressed, please use TGA!

  • Diffusemap :
Does the texture have transparency?(i.e leaves, spiderwebs etc)
  • If NO: DXT1
  • If YES: DXT5 and read the following note:

Note : Please be aware that at the moment TDM/Doom 3 only supports hard edges for transparency, as such you wont get the gradual blending from transparency, however in the future it is likely that we will be able to have this smooth blending, so saving your transparency in with DXT5 and then using the alphaTest keyword in your material will allow you to control where the hard edge is located easily. If your texture is meant to only ever have a hard edge you may also experiment with using the explicit alpha in DXT1 as this compresses much better.

  • Specularmap :
  • DXT1 - should be more than adequate as specular does not require alpha information.
  • Normalmap :
  • NONE - Use TGA!


DXT3 can be used, however it has very little benefit and is not worth using unless you have a specific reason.


Converting Image To DDS

You'll need ATI's "The Compressonator" application version 1.21.1044 with this exact version - other versions might work for diffuses and speculars, but for compressing DXT5 RXGB normalmaps this is the only version that works. Install/unzip it to a folder and create a shortcut if you like.

Compress Diffuse/Specular Maps

  • Open your source (TGA) file
  • Create Mip Maps using the Box-Filter with the lowest mip map size of 1x1.

01 mips.jpg

  • Click the Compress button next to "ATI 3Dc Compression"
  • Select the correct compression type by reading the section above, Guidelines for DDS Textures
  • Make sure that the channel weighting values are as follows :
red=0.3086
green=0.6094
blue=0.082
  • Click Compress

02 compression.jpg

  • Save your DDS to the dds/ tree, e.g. dds/textures/darkmod/stone/blah.dds.


Note about file locations: If the TGA version of your image (e.g a working diffuse) was located at :

/doom3/mymission/textures/brick/mybrick.tga

You will save the dds to :

/doom3/mymission/dds/textures/brick/mybrick.dds

However in the material file you will still refer to it as :

textures/brick/mybrick

Make sure to remove your TGA to test the finished DDS, if you have followed this it will work flawlessly.


Change the File Extension to lowercase

The Compressonator automatically names the file *.DDS, but all files should be lowercase (including TGAs). Be sure to rename the files to a lowercase .dds extension before uploading them.

Option A: Use Windows Explorer. You need to change your Explorer settings to display the file extension:

  1. Open up Windows Explorer
  2. Go Tools > Folder Options
  3. Click the View tab and disable Hide extensions for known file types

Then you can highlight your file and hit F2 (or right-click > Rename) and change the extension to lowercase.

Option B: This can also be done via the command line Start > Run... > cmd (then cd to your textures folder) and rename the files via:

ren *.DDS *.dds

Working with Transparency/Alpha

Quite often when working with alpha and converting from TGA to DDS you will have trouble getting the alpha to work correctly. There are a number of causes for this however the easiest way to deal with it is to rather save your texture out as a TIFF and then open it in The Compressonator, if you are saving from Photoshop/GIMP disable layers in the save options but make sure its set to preserve transparency. When opening it in The Compressinator remember to right click in the image and view RGBA/Alpha to check that it is correct before generating mipmaps or compressing.


Batch Processing

Choose File > Batch Compress or hit F4 to open the batch compression dialog. Choose the same compression settings as described above for your diffuse and normal maps. Don't mix diffuse/speculars with normals as they require different compression settings.

Dds batch screenshot.jpg


Command Line Parameters

ATI's compressonator provides some command line parameters to compress the textures:

thecompressonator -convert "normal.tga" "normal.dds" RXGB +red 0.0 +green 0.5 +blue 0.5 -mipmaps 
thecompressonator -convert "specular.tga" "specular.dds" DXT1 -mipmaps 
thecompressonator -convert "diffuse.tga" "diffuse.dds" DXT1 -mipmaps 
thecompressonator -convert "diffuse_with_alpha.tga" "diffuse.dds" DXT5 -mipmaps


Converting FROM DDS to common image file formats

This is trivial but slightly confusing on The Compressonator:

  • File Menu > Save Original
  • At the bottom of the dialog below the file name input select save as type. It may show DDS by default so don't be put off.
  • Select file format from BMP, PNG, or TGA (use TGA generally for Dark Mod.)
  • Make sure the filename you want is shown in the input box and click save.


Compressing Normalmaps (for reference)

Important

The normalmap DDS compression section is here for documentation purposes only. You don't need to compress the normalmaps for using them in The Dark Mod.
  • Open your source (TGA) file
  • Create Mip Maps using the Box-Filter with the lowest mip map size of 1x1 (same as for the diffuse maps).

01 normal mips.jpg

  • Compress your normalmap using the UberCompressor in DXT5 RXGB format with the colour weighting of red=0, green=0.5, blue=0.5 and "adaptive" ticked off.

02 normal compression.jpg

  • Save your DDS to the dds/ tree, e.g. dds/textures/darkmod/stone/blah_local.dds. You won't need to add the dds/ path prefix to your shader definition, this is automatically added by the game.