A Full-Screen Slide in Mid-Game

by Geep, 2021

Overview

Suppose you want to briefly show some text on-screen, but the existing TDM message gui’s don’t quite do what you want. Here’s how you can easily modify them.

Start by creating an atdm:gui_message entity in your map. Then, in the Entity Inspector, alter these 2 lines:

gui	guis/my_slide.gui
show	<number of seconds you want slide to appear>

Unlike the unaltered case, for what we're doing here, the values of this entity's spawnargs "lines" and "text" will be ignored. Also, the slide will disappear abruptly at "show" time, not fade out.

Arrange for your player to trigger this entity. Finally, we will customize my_slide.gui. In particular, we will make it possible for the user to terminate the slide early, by clicking the LMB on it. The text we will display will be hardcoded into the .gui, not passed as a spawnarg or (as would be the case with readabiles) retrieved from an .xd file.

Case 1 – Transparent Background, White Letters

In your FM’s “guis” folder, create my_slide.gui with content:

windowDef MySlide
{
	visible 1
	rect 0,0,640,480 // x, y, w, h. Origin upper-left screen corner.
	onAction {
        set "MySlide::visible" "0"; 
	}
	windowDef Text1 {
	     rect        10, 10, 620, 460 // x, y (relative to parent origin), w, h. Adjust to control margins.
	     text        "Amazing Let's try word wrapping this box exceeds screen width."
	     textscale 1
	     font "fonts/popsies"
 	}
}

Almost always, you use “rect 0,0,640,480” in the parent windowDef to establish a logical coordinate system stretched over the screen dimensions. By default, a TDM menu cursor will appear, to remind the user that they can exit early by clicking... really anywhere. You can suppress this cursor with "nocursor 1". Choose the font from the standard TDM ones (e.g., carleton is used for briefings). Adjust the font size with float "textscale", but 1 or less is best.

The text will be word-wrapped and left-justified. You can add "textalign 1" to center it (except first line stays left-justified; ugh. Stick in some leading spaces).

This is not very different than the standard atdm:gui_message treatment with the "...no_art" gui. However, if you want to have titles and paragraphs with different fonts, sizes, locations, or margins, you can just add additional windowDefs. So, for example, instead of full-screen, you could possibly use this method to provide a subtitle.

Case 2 – Opaque Black Background, White Letters

windowDef MySlide
{
	visible 1
	rect 0,0,640,480 // x, y, w, h. Origin upper-left screen corner.
	backcolor   0, 0, 0, 1 // Black background
	onAction {
	     set "MySlide::visible" "0"; 
	     set "gui::MySlideDone" "1";
	}
	windowDef Text1 { ... same as previous example ... }
}

With an opaque full-screen background, it is more necessary for the rest of the game to know when the slide is done, particularly if it’s up more than a few seconds. So onAction sets a variable, that can be then polled for in a script, shown next.

Sample Script Code to Put Up a Slide then Wait

void full_screen_slide()
{
  sys.trigger($atdm_gui_message_slide); // show the slide
 // Optionally add code here to move player to blue room.
 // We’ll need to get the gui’s overlay handle, from the attached default scriptobject, which is “tdm_gui_message”.
 // By casting, we get access to it here.
  tdm_gui_message e = $atdm_gui_message_slide;
  // Can take a while for the overlay handle to be created and for e.gui to be non-zero.
  // If spawnarg "delay" is zero, the default, a 0.1 second delay is imposed. 
  float handlenum = 0;
  while(handlenum == 0)
  {
  	  handlenum = e.gui;
	  sys.wait(0.1);
  }
  float maxtime = $atdm_gui_message_slide.getFloatKey("show");
  float slide_done == 0;
  while(maxtime > 0)
  {
	  slide_done = $player1.getGuiFloat(handlenum, "MySlideDone");
	  if(slide_done == 1) // user did gui's onAction, with LMB
		break;
	  maxtime -= 0.1;
	  sys.wait(0.1);
  }
  // Optionally add code here to move player from blue room.
  $player1.setGuiFloat(handlenum, "MySlideDone", 0); // reset just in case
}

Case 3 – Opaque Image Background, Black Letters

windowDef MySlide
{
	visible 1
	rect 0,0,640,480 // x, y, w, h. Origin upper-left screen corner.
	background	"models/darkmod/props/textures/parchment_freshpaper"
	onAction {
	     set "MySlide::visible" "0"; 
    }
    windowDef Text1 {
        rect        10, 10, 620, 460 // x, y (relative to parent origin), w, h
        text        "Amazing Let's try word wrapping this box exceeds screen width."
        forecolor   1, 1, 1, 1 // Black opaque font
        textscale 1
        font "fonts/popsies"
    }
}

Variants

We’re using a stock TDM background here, but you can have your FM include a custom .jpg, .tga, or .dds image as background. As is usual with TDM, “background” assumes the filepath from the FM’s root, and does not want the file extension to be stated here.

You could just burn the text into the background image. But translators will be unhappy unless you also provide them with the corresponding text-free image.

Case 4 – Two-Level Image Background, Black Letters

There are a number of pre-existing TDM "parchment" and "scroll" backgrounds that have wide transparent perimeters. You can substitute one of these directly (so you see the game world around the edges), or create a child windowDef with one of these, atop a parent’s opaque background (black in this example):

windowDef MySlide
{
	visible 1
	rect 0,0,640,480 // x, y, w, h. Origin upper-left screen corner.
	backcolor   0, 0, 0, 1 // Black background
	onAction {
	     set "MySlide::visible" "0"; 
	}
	windowDef Scroll1{
	     visible 1
	     rect 0,0,640,480 // x, y, w, h. This can be bigger than the parent if you want to reduce transparent perimeter
	     background	"dds/guis/assets/readables/scroll"
	}
	windowDef Text1 { ... same as previous example ... }
}

An Example

An outgrown of Case 4 can be found in FM "Away 0: Stolen Heart", where it is used to put up a substitute full-screen slide when “Skip Cutscene” is selected, then the player triggers what would have been the cutscene, but sees the slide instead. Information on the slide summarizes what the cutscene would show.

This uses multiple windowDefs to position text blocks atop the scroll. The "Continue" text provides a mental target for the cursor, but the gamer can really click anywhere.

windowDef CutSceneReplacementSlide
{
	visible 1
	rect	0,0,640,480 // x, y, w, h. Origin upper-left
	backcolor 0, 0, 0, 1
	onAction {
	   set "CutSceneReplacementSlide::visible" "0";
	   set "gui::FirstCutsceneReplacementSlideDone" "1";
	}
	windowDef Scroll1 {
	visible 1
	rect	0,0,640,480 // x, y, w, h. This can be bigger than the parent if you want to reduce transparent perimeter
	background	"guis/assets/readables/scroll"
	}
	windowDef Text1 {
	    rect        10, 30, 620, 460 // x, y, w, h. Margins enlarged to keep text on opaque portion of Scroll1
	    text        "What Emily Will Say in Her Diary"
	    //textalign   1
	    forecolor   1, 1, 1, 1 // White opaque font
	    textscale 0.5
	    textalign 1
	    font "fonts/carleton"
	}
	windowDef Text2 {
	    rect        100, 70, 440, 250 // x, y, w, h. Margins enlarged to keep text on opaque portion of Scroll1
	    text        "I startled from my prayers. There he was in my room, & he brought what we need! I snatched the key from him & flung open the long-locked door, the night air so sweet. My passion arose, and he responded ."
	    //textalign   1
	    forecolor   0, 0, 0, 1 // Black opaque font
	    textscale 0.4
	    font "fonts/popsies"
	}
	windowDef Text3 {
	    rect        100, 280, 440, 250 // x, y, w, h. Margins enlarged to keep text on opaque portion of Scroll1
	    text        "But horrors! I heard Bleda's gait, his footsteps approach. He would kill us! I bolted out the door, shouting ' Follow Me'!"
	    //textalign   1
	    forecolor   0, 0, 0, 1 // Black opaque font
	    textscale 0.4
	    font "fonts/popsies"
	}
   windowDef Text4 {
	    rect        10, 420, 590, 40 // x, y, w, h. Margins enlarged to keep text on opaque portion of Scroll1
	    text        "Continue"
	    //textalign   1
	    forecolor   1, 1, 1, 1 // White opaque font
	    textscale 0.5
	    textalign 1
	    font "fonts/carleton"
	}
}

The corresponding script function (in emily_related.script) is far more complicated than above, because it handles FM-specific chores.

For More

The information here draws on 2004-vintage GUI tutorials by Doom creator John Cormac, but adapted to TDM.