Dark Radiant Controls, Keys & Mouse

written by Fidcal

Introduction

NOTE: For the most up-to-date quick information, from within Dark Radiant, access the Help/User Guide.

This is a complete reference list by description of all Dark Radiant controls whether by buttons, menus, or keys. In addition any other material relating to the Dark Radiant controls may be included or linked to.

Changing Shortcut Keys

Shortcut keys shown are defaults and you can change them to your preference in Dark Radiant's Edit -> Keyboard Shortcuts where they are listed in alphabetical order by shortcut name (command) shown in the table below. The shortcut keys list itself gives a guide to what features are available from the keys but they are not all obvious. As well as assigning and removing shortcut keys there in that dialog you can also examine, copy, backup, make alternatives, even edit (with caution), the file in which they are stored (in XP and earlier) at

<drive>:\Documents and Settings\<user>\Application Data\DarkRadiant\input.xml

In Windows Vista they are accessed at:

<drive>:\Users\<user>\AppData\Roaming\DarkRadiant\input.xml

Guide

The Controls table is in alphabetical order by keyword in the leftmost column so scroll down or use your web browser's page search (usually CTRL+F) to find what you want. Many entries are in more than once to assist in this so 'Texture Lock' is under both 'Texture Lock' and 'Lock Texture'.

• LMB , RMB = Left, Right mouse buttons
• MMB = Middle mouse wheel or button press
• MMW is middle mouse wheel (rotation)

• LeftBbar = Dark Radiant's left button bar
• TopBbar = Dark Radiant's top button bar

• Orthoview = Dark Radiant's 2D views: top, side, front.

Searching Tree structures in Media Browser, Entity List, etc

• Point to Textures (or any tree)
• Shift + Right key to fully open the tree
• Type the key letters of what you want to find
• Up/down arrows to go to next/previous occurrence.
• Esc to get out of input field

Avoid F3 because that is likely to switch to render mode which might crash some systems.

Complete Table of All Dark Radiant Controls

Note that controls for sub-sections of Dark Radiant such as the Media Browser may be listed separately.

A to F

DARK RADIANT CONTROLS
CONTROL	DESCRIPTION	DEFAULT KEY TOOLBAR MENU ROUTE SHORTCUT NAME
Add brush to existing entity (reparent)	Assigns selected brush(es) to selected existing entity. Entity must be selected last. Only works with worldspawn primitives; you cannot reparent from one entity to another but in that case must first 'revert to worldspawn' in the right click grid view menu	Edit>reparent primitives ParentSelection
Alignment Workzone show	Shows hilighted grid lines in XYZ orthoview centred on and outlining selection and extending outwards. Use for locating selection, alignment, etc. with other items	View>Show>Show Workzone (also in Preferences> Orthoview) ShowWorkzone
Ambient sound (speaker) create	Creates speaker. See Adding ambient Sounds to your Map	RMB orthoview context menu
Angles show	Show angles ??	View>Show>Show Angles ShowAngles
Append to patch	Append either two rows or two columns at either beginning or end of a patch.	Patch>append PatchAppendColumnBeginning PatchAppendColumnEnd PatchAppendRowBeginning PatchAppendRowEnd
Axes show	Show Axes ??	View>Show>Show Axes ShowAxes
Background Image	Sets background image as wallpaper in XYZ orthoview	View>background image
Ball-shaped brush	Converts selected brush to sphere shape of N x N faces where N can be 3 (9 faces) to 7 (49 faces.)	Brush>sphere BrushSphere
Bevel Patch	Produces a 90° horizontal curved patch textured on the outside (see Invert Patch to reverse.) If brush(es) are already selected then the patch takes the dimensions of the outer limits of all. The brush(es) are not deleted. A single brush of YX 1:1 will produce a quarter-circle curved patch.	Patch>Bevel PatchBevel
Blocks show	Show blocks in XYZ orthoview	View>Show>Show Blocks ShowBlocks
Brightness of lights	Display Light Inspector. Select Colour. Adjust the 'value' field for brightness.	L ToggleLightInspector
Brush, change number of sides	Convert selected brush to be N-sided	Ctrl+N Brush[N]Sided
Brush Cone	Converts selected brush to cone shape of N side faces where N can be 3, 4 (pyramids) to 32 For a curved, bullet-shaped cone see Patch cone.	Brush>Cone BrushCone
Brush create	Create new brush (must have nothing selected)	LMB+Drag in orthoview
Brush Export as CM file	Create collision model from primitive children of selected func entity and save as .cm file; useful for moveable entities. Not checked for Doom3 clipmodel limits (16 polygons.)	Edit>Create collision model.. BrushExportCM
Brush Export as OBJ file	Save selected brushes as OBJ file for import into 3D modelling programs.	Edit>Export selected brushes to OBJ BrushExportOBJ
Brushes Hollow (CSG)	Replaces a selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes overlap at the corners so consider instead CSG Room.	LeftBbar: Brush>CSG>Make hollow CSGHollow
Brushes Merge (CSG)	Attempts to merge two or more brushes into one. Intended composite shape must be convex.	Ctrl+U LeftBbar: CSGMerge
Brush prism	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Brush room (CSG)	Replaces a selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes do not overlap at the corners (compare CSG Hollow.)	LeftBbar: CSGRoom
Brush Sphere	Converts selected brush to sphere shape of N x N faces where N can be 3 (9 faces) to 7 (49 faces.)	Brush>sphere BrushSphere
Brushes subtract (CSG)	Uses selected brush(es) as a template to 'subtract' from any overlapping UNselected target brush(es). If necessary the target is replaced with multiple brushes. The brushes do not overlap at the corners. The originally selected brush template is still selected and not destroyed.	Shift+U LeftBbar: CSGSubtract
Camera	Shows/closes camera view window	View>Camera view Ctrl+Shift+C ToggleCamera
Camera Angle Down	Tilts camera view down. See also Camera Free Move as alternative.	Z CameraAngleDown
Camera Angle Up	Tilts camera view up. See also Camera Free Move as alternative.	A CameraAngleUp
Camera Back	Pulls camera view back. See also Camera Free Move as alternative.	Down CameraBack
Camera center (level) view	levels camera view to horizontal. See also Camera Free Move as alternative.	End View>camera>Center CenterView
Camera Copy Shader, Texture	Copies texture from single selected face or patch to Dark Radiant's shader clipboard.	key:unassigned Camera view:MMB Edit>Copy shader CopyShader
Camera Down	Lowers camera view vertically. See also Camera Free Move as alternative.	C CameraDown
Camera Down Floor	Moves camera down to next horizontal brush surface	Page_down View>camera>down floor DownFloor
Camera Forward	Move camera view forward. See also Camera Free Move as alternative.	Up Mousewheel forward CameraForward
Camera Free Mouse Mode set and Moves	In camera view, RMB either toggles (locks/ unlocks) free move mode or else holds it till RMB released (depends on Preference> camera> Freelook mode can be toggled settings) With it UNchecked you must additionally keep RMB pressed during 'Free moves.'	RMB(lock or hold) then mouse: . Turn, look any direction. . Ctrl+drag = up, down, strafe left & right . Shift+Ctrl+drag = forward, backward, strafe left & right. See also individual controls below assignable to keys
Camera Free Move Back	Move camera view back	Key: Down Mousewheel backward CameraFreeMoveBack
Camera Free Move Down	Move camera view down	Key: unassigned CameraFreeMoveDown
Camera Free Move Forward	Move camera view forward	Key: Up CameraFreeMoveForward
Camera Free Move Left	Move camera view left	Key: Left CameraFreeMoveLeft
Camera Free Move Right	Move camera view right	Key: Right CameraFreeMoveRight
Camera Free Move Up	Move camera view up	Key: unassigned CameraFreeMoveUp
Camera Hide	Shows/closes camera view window	View>Camera view Ctrl+Shift+C ToggleCamera
Camera Left	Move camera left	Left CameraLeft
Camera move Here in XYZ orthoview	In orthoview, moves the camera to the point clicked.	Ctrl+MMB
Camera point this way	In orthoview, points the camera to the point clicked.	MMB
Camera Paste Texture	Pastes texture from Dark Radiant's shader clipboard to selected items.	Key:unassigned Camera view>Ctrl+MMB Edit>Paste shader PasteShader
Camera Paste Texture All Surfaces of brush	Pastes texture from Dark Radiant's shader clipboard to all faces of selected items.	Key:unassigned Camera view>Ctrl+Alt+MMB
Camera Paste Texture Coordinates	Paste Texture Coordinates (only applies to Patch-to-Patch paste operations)	Key:unassigned Camera view>Alt+MMB
Camera Paste Texture Natural	Pastes texture from Dark Radiant's shader clipboard to selected items adjusting plane distortions - see DarkRadiant - Paste Texture Natural for details.	Key:unassigned Camera view>Ctrl+Shift+MMB PasteShaderNatural
Camera Position N restore	changes camera position to that saved previously with Save position N.	Alt+N (N=0 to 9) LoadPositionN
Camera Position N save	Stores camera position. (restore with Load Position N.)	Ctrl+Alt+N (N=0 to 9) SavePositionN
Camera Right	Turn camera right	Right CameraRight
Camera show	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
Camera Strafe Left	Camera move Left	comma CameraStrafeLeft
Camera Strafe Right	Camera Move Right	period CameraStrafeRight
Camera Turn	Turn in any direction in camera view	RMB+drag
Camera Up	Move Camera up	D CameraUp
Camera Up Floor	Moves camera up to next horizontal brush surface	Page_Up View>camera>up floor UpFloor
Camera window toggle	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
Cap selected curved patch	Caps both ends of a selected curved patch by creating new patches of the same texture to cover the area outlined by the curve.	Shift+C LeftBbar: Patch>cap selected CapCurrentCurve
Cap End Patch	Produces a 180° horizontal curved patch textured on the outside (see Invert Patch to reverse.) If brush(es) are already selected then the patch takes the dimensions of the outer limits of all. The brush(es) are not deleted. A single brush of YX 1:2 will produce a semi-circle patch. Not to be confused with Cap Selection which caps a 'gap', End Cap is for eg, rounding a wall corner or just producing a curve quickly.	Patch>End cap PatchEndCap
Center (level) camera view	levels camera view to horizontal.	End View>camera>Center CenterView
Center X Y View	Centres selection in current orthoview else centres camera if no selection	Ctrl+Alt+Tab CenterXYView
Center X Y Views	Centres selection in all orthoviews else centres camera if no selection	Ctrl+Shift+Tab CenterXYViews
Change number of sides of brush	Convert selected brush to be N-sided	Ctrl+N Brush[N]Sided
Circular Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Clear Selected	Unselect selected. In component editing, unselects components on first use, switches back to primitive mode on second, and unselects all primitives on third.	Esc Edit>Clear Selection UnSelectSelection
Clipper Mode (slice, clip, crop, selected brush.)	Mode: Clipper Mode cancels, & is cancelled by, Rotate, Move/Resize, & Translate Modes. Useage: LMB on edges of selected brush to set and drag 2 or 3 points 0,1,2 in XYZ planes. To Clip: Press Return (Enter) to clip off and discard (delete) section to clockwise right from 0 to 1, and 1 to 2. (see diagram which points direction of discard.) To Split: Press Shift+Return (Enter) to split brush into two brushes, preserving both.	Mode: X LeftBbar: ToggleClipper Useage: Key: Return (Enter) Brush>Clipper>Clip Selection ClipSelected Shift+Return (Enter) Brush>Clipper>Clip Selection SplitSelected
Clipper Flip Sides	In Clipper mode (see Clipper Toggle) toggles discard side from clockwise right to clockwise left (see Clipper Mode)	Ctrl+Return Brush>Clipper>Flip clip orientation FlipClip
Clone Selected	Makes a duplicate of selected items at same position; selects them; unselects original.	SPACE Edit>duplicate CloneSelection
Close Camera	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
Close Console	Shows/closes console text info window	O View>Console view ToggleConsole
Close entity Inspector	Shows/closes entity inspector with entity properties	N View>Entity inspector ToggleEntityInspector
Close texture browser	Shows/closes texture browser window with previously chosen textures (see also media browser for all.)	T View>Texture browser ViewTextures
Colour of lights	Display Light Inspector. Select Colour. Use colour selector or type in values direct.	L ToggleLightInspector
Colour Preferences	Set your colour preferences for Dark Radiant. (for other preferences see Preferences.)	View>Colours EditColourScheme
Command List	Shows list of commands and user-set shortcut keys assigned to them.	Help>Shortcuts List ShowCommandList
Cone-shaped brush	Converts selected brush to cone shape of N side faces where N can be 3, 4 (pyramids) to 32. For a curved, bullet-shaped cone see Patch cone.	Brush>Cone BrushCone
Cone-shaped patch(curved)	Creates a curved bullet-shaped cone textured on the outside (see Invert Patch to reverse.) For a true cone see Brush cone. For a dome use key V for vertex mode then drag the top centre vertex down to the halfway mark.	Patch>cone PatchCone
Config (Preferences)	Set Dark Radiant preferences. For display colours see Colours.	P Edit>Preferences Preferences
Connect Selection	Selected entity 1 targets selected entity 2	Entity>connect selected entities Ctrl+K ConnectSelection
Console show/hide	Shows/closes console text info window	O View>Console view ToggleConsole
Convert brush, number of sides	Convert selected brush to be N-sided	Ctrl+N Brush[N]Sided
Convert (assign) selection to func_static	Assign selection to func_static.	RMB orthoview context menu
Coordinates of grid show	Show grid coordinates along top and down sides of XYZ orthoview grid. Coordinates of items in the grid see Size Info. Cursor coordinates are in status bar.	View>Show>Show Coordinates ShowCoordinates
Coordinates of items and size info show	Shows size info and coordinates of selected in XYZ orthoview	View>Show>Show size info (also in Preferences>Orthoview) ToggleShowSizeInfo
Copy	Copies selected with offset from 0,0,0 to the Windows clipboard. If a face is selected then its texture is copied to Dark Radiant's Shader Clipboard	Ctrl+C Edit>Copy Copy
Copy Shader, Texture	Copies texture from single selected face or patch to Dark Radiant's shader clipboard.	key:unassigned Camera view:MMB Edit>Copy shader CopyShader
Create brush	Create new brush (must have nothing selected)	LMB+Drag in orthoview
Create or assign to Entity	Create or assign to entity.	RMB orthoview context menu
Create Light	Create Light	RMB orthoview context menu
Create Model	Create model assigned to func_static.	RMB orthoview context menu
Crosshairs Toggle	Toggle Crosshairs (grid) on and off in orthoview	Shift+X Edit>Preferences>Orthoview ToggleCrosshairs
CSG Hollow brushes	Replaces a selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes overlap at the corners so consider instead CSG Room.	LeftBbar: Brush>CSG>Make hollow CSGHollow
CSG Merge brushes	Attempts to merge two or more brushes into one. Intended composite shape must be convex.	Ctrl+U LeftBbar: CSGMerge
CSG Room brushes	Replaces selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes do not overlap at the corners (compare CSG Hollow.)	LeftBbar: CSGRoom
CSG Subtract brushes	Uses selected brush(es) as a template to 'subtract' from any overlapping UNselected target brush(es). If necessary the target is replaced with multiple brushes. The brushes do not overlap at the corners. The originally selected brush template is still selected and not destroyed.	Shift+U LeftBbar: CSGSubtract
Cubic Clip Camera mode	Mode in which camera render distance can be controlled.	Shift+F TopBbar: ToggleCubicClip
Cubic Clip Zoom In	Reduces render distance in camera view if Cubic Clip Camera view mode is set.	Ctrl+plus View>Camera>far clip plane in CubicClipZoomIn
Cubic Clip Zoom Out	Increases render distance in camera view if Cubic Clip Camera view mode is set.	Ctrl+minus View>Camera>far clip plane out CubicClipZoomOut
Curve creation	Consider patch bevel, patch end cap, brush prism
Curve Append Control Point	?? see NURBS Curves	LeftBbar: CurveAppendControlPoint
Curve Catmull Rom Create	?? see NURBS Curves	CreateCurveCatmullRom
Curve Convert Type	?? see NURBS Curves	LeftBbar: CurveConvertType
Curve NURBS Create	?? see NURBS Curves	LeftBbar: CreateCurveNURBS
Curve Insert Control Point	?? see NURBS Curves	LeftBbar: CurveInsertControlPoint
Curve Remove Control Point	?? see NURBS Curves	LeftBbar: CurveRemoveControlPoint
Cycle Cap Texture Patch	??	Ctrl+Shift+N CycleCapTexturePatch
Cylinders, pipes, pillars, cylinders, or rods: (patches, round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Delete patch, rows or columns	Delete either two rows or two columns at either beginning or end of a patch.	Patch>delete> PatchDeleteColumnBeginning PatchDeleteColumnEnd PatchDeleteRowBeginning PatchDeleteRowEnd
Delete Selected	Deletes selected items	BackSpace Edit>Delete DeleteSelection
Deselect Selected	Unselect selected. In component editing, unselects components on first use, switches back to primitive mode on second, and unselects all primitives on third.	Esc Edit>Clear Selection UnSelectSelection
Disks, pipes, pillars, cylinders, or rods: (patches, round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Disk brush (prism)	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Down Floor	Moves camera down to next horizontal brush surface	Page_down View>camera>down floor DownFloor
Drag edges	Toggles Drag Edges mode. Drag vertices shown on edges. Individual edges of a selected brush can be moved independently to reshape the brush.	E Modify>Components>Edges DragEdges
Drag Entities	Toggles Drag Entities mode. ??	Modify>Components>Entities DragEntities
Drag Faces	Toggles Drag Faces mode. Similar to Resize but drag vertices shown on brush faces to pull/push the face. Individual faces of a selected brush can be moved independently to resize the brush.	F Modify>Components>Faces DragFaces
Drag Vertices	Toggles Drag just vertices/else whole brush mode. Enables 'corners of brushes to be moved to reshape brush as against moving whole brush. Caution: Snap to grid and invalidity of concave brush shapes may give unexpected results! Consider also Clipper instead.	V TopBbar: Modify>Components>Vertices DragVertices
Edges,drag	Toggles Drag Edges mode. Drag vertices shown on edges. Individual edges of a selected brush can be moved independently to reshape the brush.	E TopBbar: Modify>Components>Edges DragEdges
End Cap Patch	Produces a 180° horizontal curved patch textured on the outside (see Invert Patch to reverse.) If brush(es) are already selected then the patch takes the dimensions of the outer limits of all. The brush(es) are not deleted. A single brush of YX 1:2 will produce a semi-circle patch. Not to be confused with Cap Selection which caps a 'gap', End Cap is for eg, rounding a wall corner or just producing a curve quickly.	Patch>End cap PatchEndCap
Entity create or assign to	Create or assign to entity.	RMB orthoview context menu
Entity Inspector toggle show/hide	Shows/closes entity inspector with entity properties	N View>Entity inspector ToggleEntityInspector
Entity List	Toggles show/hide list of all entities in the map. Can select.	L View>entity list EntityList
Entity names show	Show entity names in XYZ orthoview	View>Show>Show Names ShowNames
Entity revert to worldspawn	Reverts primitives group entity back to worldspawn	Shift+G Entity>revert group to worldspawn RMB orthoview menu>revert to worldspawn RevertToWorldspawn
Erase Selected	Deletes selected items	BackSpace Edit>Delete DeleteSelection
Exit Dark Radiant	Close Dark Radiant	File>Exit Exit
Expand Selection To Entities	Selects all primitive children of an entity if one child is selected. Works also with Worldspawn entity.	Ctrl+Alt+E Edit>Expand selection to whole entities ExpandSelectionToEntities
Export collision model CM file	Create collision model from primitive children of selected func entity and save as .cm file; useful for moveable entities. Not checked for Doom3 clipmodel limits (16 polygons.)	Edit>Create collision model.. BrushExportCM
Export selected as OBJ file	Save selected brushes as OBJ file for import into 3D modelling programs.	Edit>Export selected brushes to OBJ BrushExportOBJ
Export selected as prefab	Save selected group of brushes, models, etc. as prefab file. Includes offset to insertion point.	File > Save selected as prefab SaveSelectedAsPrefab
Faces, drag	Toggles Drag Faces mode. Similar to Resize but drag vertices shown on brush faces to pull/push the face. Individual faces of a selected brush can be moved independently to resize the brush.	F TopBbar: Modify>Components>Faces DragFaces
Far Clip Plane Camera mode	Mode in which camera render distance can be controlled. ??	TopBbar:
Far Clip Plane Zoom In	Reduces render distance in camera view if Cubic Clip Camera view mode is set. ??	Ctrl+plus View>Camera>far clip plane in CubicClipZoomIn
Far Clip Plane Zoom Out	Increases render distance in camera view if Cubic Clip Camera view mode is set. ??	Ctrl+minus View>Camera>far clip plane out CubicClipZoomOut
Filter various types	Hides all of type where 'type' can be entities, brushes, lights, and others (see DR Filter menu.) For custom filtering see Defining custom Filters in DarkRadiant. For other filtering, see Hide, and Region.	Filter>All 'type' FilterAll'Type'
Filter Region	see Region options
Filter (Hide) Selected	Hide selected items. Use any time to hide more and more (see Show Hidden to reveal all)	H View > Hide/Show HideSelected
Find Brush	Makes brush #n input the selection. Or gives n if brush already selected. Buggy?	Map>Find brush FindBrush
Find and Replace Textures	Replaces all occurrences in the map (or selections) of one texture with another. No default control but you can set a shortcut key. Shows a dialog with inputs for first texture and desired replacement.	FindReplaceTextures
Flip Clip	In Clipper mode (see Clipper Toggle) toggles discard side from clockwise right to clockwise left (see Clip Selected)	Ctrl+Return Brush>Clipper>Flip clip orientation FlipClip
Flip (mirror) Selection X	Converts selected brushes or patches to mirror version of itself along the X plane	LeftBbar: Modify>Mirror>Mirror X MirrorSelectionX
Flip (mirror) Selection Y	Converts selected brushes or patches to mirror version of itself along the Y plane	LeftBbar: Modify>Mirror>Mirror Y MirrorSelectionY
Flip (mirror) Selection Z	Converts selected brushes or patches to mirror version of itself along the Z plane	LeftBbar: Modify>Mirror>Mirror Z MirrorSelectionZ
Flip Texture X	Mirror texture in X plane	> Surface Inspector FlipTextureX
Flip Texture Y	Mirror texture in Y plane	> Surface Inspector FlipTextureY
Fog (on Light Inspector)	Display Light Inspector. Select fog, eg, delta1_fog. To enable, type property ShaderParm3 with a visibility distance value in Doom units directly into the light's properties (Entity Inspector, default key N) and click the check button.	L ToggleLightInspector
Func_static, convert (assign) selection to	Assign selection to func_static.	RMB orthoview context menu

G to M

DARK RADIANT CONTROLS
CONTROL	DESCRIPTION	DEFAULT KEY TOOLBAR MENU ROUTE SHORTCUT NAME
Game Select	Select Game settings to specify Doom3 path and mod, eg, darkmod.	Key:P>Preferences>Game Edit>Preferences>Game File>Select Game ProjectSettings
Globe-shaped brush	Converts selected brush to sphere shape of N x N faces where N can be 3 (9 faces) to 7 (49 faces.)	Brush>sphere BrushSphere
Grid Down	Decrease grid size in steps as for Grid Size N in orthoview.	plus GridDown
Grid size N	Sets XYZ orthoview grid size to N doom units where N can be 0.125, 0.25, 0.5, 1,2,4, etc doubling up to 256	keys: 1(1) to 9(256) Grid>GridN SetGridN
Grid snap	Snaps selected to grid in orthoview.	Ctrl+G LeftBbar: Grid>snap selected to grid SnapToGrid
Grid toggle show/hide in orthoview	Hides/shows XYZ orthoview grid	key: 0 (zero) ToggleGrid
Grid Up	Increase grid size in steps as for Grid Size N in orthoview.	minus GridUp
Group Cycle Backward	??	Shift+ISO_Left_Tab GroupCycleBackward
Group Cycle Forward	??	Tab GroupCycleForward
Hide Camera	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
Hide Console	Shows/closes console text info window	O (letter) View>Console view ToggleConsole
Hide entity Inspector	Shows/closes entity inspector with entity properties	N View>Entity inspector ToggleEntityInspector
Hide Light Radii	Shows/hides the area covered by every light.	Ctrl+Alt+Shift+F TopBbar: ToggleShowAllLightRadii
Hide Selected	Hide selected items. Use any time to hide more and more (see Show Hidden to reveal all)	H View > Hide/Show HideSelected
Hide texture browser	Shows/closes texture browser window with previously chosen textures (see also media browser for all.)	T View>Texture browser ViewTextures
Hide (filter) various types	Hides all of type where 'type' can be entities, brushes, lights, and others (see DR Filter menu.) For custom filtering see Defining custom Filters in DarkRadiant. For other filtering, see Hide, and Region.	Filter>All 'type' FilterAll'Type'
History: Open most recently used map N	Opens most recently used map N where N can be 1 to 11	File>1 to 11 MRUOpenN
Hollow brush (CSG)	Replaces a selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes overlap at the corners so consider instead CSG Room.	LeftBbar: Brush>CSG>Make hollow CSGHollow
Horizontal (level) camera view	levels camera view to horizontal.	End View>camera>Center CenterView
Image background	Sets background image as wallpaper in XYZ orthoview	View>background image
Import Map	Adds a map file (as a draggable selection centred at XYZ 0,0,0) to the current map in Dark Radiant.	File > Import ImportMap
Info of Map	List how many of all entities plus total number of entities, brushes, and patches.	M Map>Map info MapInfo
Insert into patch	Insert either two rows or two columns at either beginning or end of a patch.	Patch>insert> PatchInsertColumnBeginning PatchInsertColumnEnd PatchInsertRowBeginning PatchInsertRowEnd
Insert Prefab	Inserts prefab (group of brushes, models, etc.) as draggable selection. Includes offset to insertion point.	File > Load prefab RMB orthoview context menu LoadPrefab
Invert Patch surface or curve	A patch is one visible textured face even if curved around. This control reverses that face to the other side of the patch, eg, an externally visible dome can become a dome viewed from inside; a pillar becomes the inside of a tube. Can use two patches if both sides needed but 'Thicken' is better.	Ctrl+I Patch>Matrix>invert InvertCurve
Invert Selected	Clears selected and selects everything that was not selected.In component editing (vertices, edges,) inverts the current component selection only.	I Edt>Invert selection InvertSelection
Keys and Command List	Shows list of commands and user-set shortcut keys assigned to them.	Help>Shortcuts List ShowCommandList
Leak Spot Next	Moves camera to next point (nearer entity) on a line that winds its way around brushes between an entity and a leak to the void. (see also Pointfile.)	View>camera>Next leak spot Ctrl+Shift+K NextLeakSpot
Leak Pointfile toggle	Uses Pointfile info made by Doom3's dmap command to draw red line from void to first entity to indicate leak path. (see also Next and Previous leak spot.)	File>Pointfile TogglePointfile
Leak Spot Previous	Moves camera to previous point (further from entity) on a line that winds its way around brushes between an entity and a leak to the void. Repeatedly pressing this moves eventually to the leak. (see also Pointfile.)	Ctrl+Shift+L View>camera>Previous leak spot PrevLeakSpot
Level (center) camera view	levels camera view to horizontal.	End View>camera>Center CenterView
Light Inspector Toggle	Displays Light Inspector to adjust light properties of colour, brightness, filtering, fog and more.	L View>Light inspector ToggleLightInspector
Light brightness	Display Light Inspector. Select Colour. Adjust the 'value' field for brightness.	L View>Light inspector ToggleLightInspector
Light creation	Create a light	RMB orthoview context menu
Lights colour	Display Light Inspector. Select Colour. Use colour selector or type in values direct.	L View>Light inspector ToggleLightInspector
Lights, Show All Radii	Shows/hides the area covered by every light.	Ctrl+Alt+Shift+F TopBbar: ToggleShowAllLightRadii
Load Position N of camera	changes camera position to that saved previously with Save position N.	Alt+N (N=0 to 9) LoadPositionN
Load Prefab	Inserts prefab (group of brushes, models, etc.) as draggable selection. Includes offset to insertion point.	File > Load prefab Grid > Right click > Insert prefab LoadPrefab
Locate selection using Workzone gridlines	Shows hilighted grid lines in XYZ orthoview centred on and outlining selection and extending outwards. Use for locating selection, alignment, etc. with other items	View>Show>Show Workzone ShowWorkzone
Lock Texture	Toggles texture lock mode which keeps an applied texture aligned relative to its surface rather than the world map when the selection is moved.	Shift+T or S>Surface Inspector TopBbar: Brush>Texture lock TogTexLock
Look Through Camera	Look Through Camera ??	View>Camera>Look Through Camera LookThroughCamera
Look Through Selected	Look Through Selected ??	View>Camera>Look Through Selected LookThroughSelected
Make Detail	??	Ctrl+M Brush>Make detail MakeDetail
Make Structural	??	Ctrl+Shift+S Brush>Make structural MakeStructural
Map Info	List how many of all entities plus total number of entities, brushes, and patches.	M Map>Map info MapInfo
Map, Open most recently used N	Opens most recently used map N where N can be 1 to 11	File>1 to 11 MRUOpenN
Matrix Transpose, patch	Same as invert ??	Ctrl+Shift+M Patch>Matrix>transpose MatrixTranspose
Media browser	Browse all available textures (see also texture browser for previously chosen.)	Select media tab on inspector panel (use T for texture browser first if panel not showing.)
Merge brushes (CSG)	Attempts to merge two or more brushes into one. Intended composite shape must be convex.	Ctrl+U LeftBbar: CSGMerge
Merge (Import) Map	Adds a map file (as a draggable selection centred at XYZ 0,0,0) to the current map in Dark Radiant.	File > Import ImportMap
Mirror (flip) Selection X	Converts selected brushes or patches to mirror version of itself along the X plane	LeftBbar: Modify>Mirror>Mirror X MirrorSelectionX
Mirror (flip) Selection Y	Converts selected brushes or patches to mirror version of itself along the Y plane	LeftBbar: Modify>Mirror>Mirror Y MirrorSelectionY
Mirror (flip) Selection Z	Converts selected brushes or patches to mirror version of itself along the Z plane	LeftBbar: Modify>Mirror>Mirror Z MirrorSelectionZ
Mod setting/ selection	Select Game settings to specify Doom3 path and mod, eg, darkmod.	P>Preferences>Game Edit>Preferences>Game File>Select Game ProjectSettings
Model creation	Create model assigned to func_static.	RMB orthoview context menu
Models Refresh	Reloads all model resources used in map.	File>Refresh models RefreshReferences
Model, free rotation	??	Modify>Free Model Rotation ToggleFreeModelRotation
Monster_clip surround model	Creates a brush textured in monster_clip to selected model. (see Pathfinding	RMB orthoview context menu
Most recently used maps, open N	Opens most recently used map N where N can be 1 to 11	File>1 to 11 MRUOpenN
Mouse Rotate Mode	Mode: Rotate Mode cancels, & is cancelled by, Clipper, Move & Resize and Translate Modes. Works on selected: single models or brushes/patches or on multiple selected brushes/patches which will rotate around a common centre. Rotate: LMB-drag within circle to freely rotate in all planes. Caution: brushes/patches may distort badly when snapping to grid during rotation. LMB-drag outside of circle to rotate only in the plane of the axis of view. Compare also Rotate & Scale Dialog	Mode: Key: R LeftBbar: MouseRotate Useage: LMB-drag
Move & Resize Selection Mode	Mode: Move & Resize Mode cancels, & is cancelled by, Clipper, Rotate & Translate Modes. Move: Drag LMB within selected to move. (may need touch collision model outline) See also other move, nudge, and mouse translate options. Resize: Drag LMB outside of selected brush or patch to/ from face to resize it. Compare also 'Drag Faces'. For models, see Rescaling, Resizing, Models in Dark Radiant	Mode: Key: Q LeftBbar: MouseDrag Useage: LMB-drag
Move (Drag, Translate) in one plane (Mode)	Mode: Move (Translate) Mode cancels, & is cancelled by, Clipper, Rotate, Move & Resize Modes. Useage: In camera or orthoview, LMB any side of selection and origin pointer for that plane turns yellow. Then either side or within selection in that plane, LMB will drag only in that plane preventing sideslip. Compare also alternative 'Nudge', and 'Move (drag) selection in one plane' which are not locked modes.	W LeftBbar: MouseTranslate
Move (drag) selection in one plane	LMB within item THEN Shift THEN drag to move it in one plane, eg, up/down else left/right. Note: Pressing shift first drags out a selection rectangle (see Select All Partial) See also other move, nudge, and mouse translate options.	LMB, then Shift then drag
Move (nudge) Selection Down	Move selection one grid line down.	Alt+Down Arrow key Modify>Nudge>Nudge down SelectNudgeDown
Move (nudge) Selection Left	Move selection one grid line left	Alt+Left Arrow key Modify>Nudge>Nudge left SelectNudgeLeft
Move (nudge) Selection Right	Move selection one grid line right	Alt+Right Arrow key Modify>Nudge>Nudge right SelectNudgeRight
Move (nudge) Selection Up	Move selection one grid line up	Alt+Up Arrow key Modify>Nudge>Nudge up SelectNudgeUp
Move Selection Down	Move selection down one grid line (see also Nudge)	Shift+KP_Subtract MoveSelectionDOWN
Move Selection Up	Move selection up one grid line (see also Nudge)	Shift+KP_Add MoveSelectionUP
Move Vertices	Toggles Drag Vertices mode. Enables vertices of brushes and patches to be moved individually to reshape brush. Caution: Snap to grid and invalidity of concave brush shapes may give unexpected results! Consider also Clipper instead.	V Top Toolbar Modify>Components>Vertices DragVertices

N to S

DARK RADIANT CONTROLS
CONTROL	DESCRIPTION	DEFAULT KEY TOOLBAR MENU ROUTE SHORTCUT NAME
Names show toggle	Shows/hides all entity names in XYZ orthoview	View>Show>Show Names (also in Preferences>Orthoview) ShowNames
New Map	Clear all ready to create new map.	File>New Map NewMap
New XYZ Orthoview window	Creates new XYZ Orthoview window	Ctrl+Alt+N View>New XY view NewOrthoView
Next Leak Spot	Moves camera to next point (nearer entity) on a line that winds its way around brushes between an entity and a leak to the void. (see also Pointfile.)	Ctrl+Shift+K View>camera>Next leak spot NextLeakSpot
Next View	Cycles to next Orthoview XYZ views : XY (top), XZ (front), YZ side.	Ctrl+Tab TopBbar: View>Orthographic>Next NextView
Normalise Texture	??	NormaliseTexture
Nudge (move) Selection Down	Move selection one grid line down.	Alt+Down Arrow key Modify>Nudge>Nudge down SelectNudgeDown
Nudge (move) Selection Left	Move selection one grid line left	Alt+Left Arrow key Modify>Nudge>Nudge left SelectNudgeLeft
Nudge (move) Selection Right	Move selection one grid line right	Alt+Right Arrow key Modify>Nudge>Nudge right SelectNudgeRight
Nudge (move) Selection Up	Move selection one grid line up	Alt+Up Arrow key Modify>Nudge>Nudge up SelectNudgeUp
Objectives Editor	Displays Mission Objectives Editor. See Objectives	Map>Objectives ObjectivesEditor
Open Map	Load in a previously created map file.	Key: Ctrl+O TopBbar: File>Open OpenMap
Open Map most recently used N	Opens most recently used map N where N can be 1 to 11	File>1 to 11 MRUOpenN
Options (Preferences)	Set Dark Radiant preferences. For display colours see Colours.	P Edit>Preferences Preferences
Orthoview cycle next view	Cycles to next Orthoview XYZ views : XY (top), XZ (front), YZ side.	Ctrl+Tab TopBbar: View>Orthographic>Next NextView
Orthoview window creation	Creates new XYZ Orthoview window	Ctrl+Alt+N View>New XY view NewOrthoView
Overlay Dialog		Alt+O OverlayDialog
Parent selected primitives	Assigns selected brush(es) to selected existing entity. Entity must be selected last. Only works with worldspawn primitives; cannot reparent from one entity to another but must first 'revert to worldspawn' in the right click grid view menu	Edit>Reparent primitives ParentSelection
Paste	Pastes from Windows clipboard to original offset from 0,0,0 (see also Paste to camera.) If faces selected then the texture is copied from Dark Radiant's Shader Clipboard	Ctrl+V Edit>Paste Paste
Paste to Camera	Pastes from Windows clipboard to centre on camera position.	Alt+V Edit>Paste to camera PasteToCamera
Paste Shader	Pastes texture from Dark Radiant's shader clipboard to selected items.	Key:unassigned Camera view>Ctrl+MMB Edit>Paste shader PasteShader
Paste Shader Natural	Pastes texture from Dark Radiant's shader clipboard to selected items adjusting plane distortions - see DarkRadiant - Paste Texture Natural for details.	Key:unassigned Camera view>Ctrl+Shift+MMB PasteShaderNatural
Paste Texture	Pastes texture from Dark Radiant's shader clipboard to selected items.	Key:unassigned Camera view>Ctrl+MMB Edit>Paste shader PasteShader
Paste Texture All Surfaces of brush	Pastes texture from Dark Radiant's shader clipboard to all faces of selected items.	Key:unassigned Camera view>Ctrl+Alt+MMB
Paste Texture Coordinates	Paste Texture Coordinates (only applies to Patch-to-Patch paste operations)	Key:unassigned Camera view>Alt+MMB
Paste Texture Natural	Pastes texture from Dark Radiant's shader clipboard to selected items adjusting plane distortions - see DarkRadiant - Paste Texture Natural for details.	Key:unassigned Camera view>Ctrl+Shift+MMB PasteShaderNatural
Patch (flat, simple mesh)	Creates a flat rectangular patch its texture surface facing out the XYZ orthoview (see Invert Patch to reverse.) If a single brush was already selected then a patch is created of the same texture and area as the face in the XYZ view and the brush is optionally deleted. If multiple brushes were selected then a patch is created to form a rectangular boundary around them and the brushes remain.	Shift+P Patch>Simple patch mesh SimplePatchMesh
Patch Append	Append either two rows or two columns at either beginning or end of a patch.	Patch>append PatchAppendColumnBeginning PatchAppendColumnEnd PatchAppendRowBeginning PatchAppendRowEnd
Patch Bevel	Produces a 90° horizontal curved patch textured on the outside (see Invert Patch to reverse.) If brush(es) are already selected then the patch takes the dimensions of the outer limits of all. The brush(es) are not deleted. A single brush of YX 1:1 will produce a quarter-circle curved patch.	Patch>Bevel PatchBevel
Patch cap selected curve	Caps both ends of a selected curved patch by creating new patches of the same texture to cover the area outlined by the curve.	Shift+C Patch>cap selected CapCurrentCurve
Patch Cone	Creates a curved bullet-shaped cone textured on the outside (see Invert Patch to reverse.) For a true cone see Brush cone. For a dome use key V for vertex mode then drag the top centre vertex down to the halfway mark.	Patch>cone PatchCone
Patch cylinders, pillars, disks, rods, or pipes: (round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Patch, delete rows or columns	Delete either two rows or two columns at either beginning or end of a patch.	Patch>delete> PatchDeleteColumnBeginning PatchDeleteColumnEnd PatchDeleteRowBeginning PatchDeleteRowEnd
Patch End Cap	Produces a 180° horizontal curved patch textured on the outside (see Invert Patch to reverse.) If brush(es) are already selected then the patch takes the dimensions of the outer limits of all. The brush(es) are not deleted. A single brush of YX 1:2 will produce a semi-circle patch. Not to be confused with Cap Selection which caps a 'gap', End Cap is for eg, rounding a wall corner or just producing a curve quickly.	Patch>End cap PatchEndCap
Patch Insert	Insert either two rows or two columns at either beginning or end of a patch.	Patch>insert> PatchInsertColumnBeginning PatchInsertColumnEnd PatchInsertRowBeginning PatchInsertRowEnd
Patch Inspector	Toggles show/hide patch inspector for inspection & control of individual vertices coordinates. (use surface inspector for texture)	Shift+S View>patch inspector PatchInspector
Patch invert, reverse, surface or curve	A patch is one visible textured face even if curved around. This control reverses that face to the other side of the patch, eg, an externally visible dome can become a dome viewed from inside; a pillar becomes the inside of a tube. Can use two patches if both sides needed but 'Thicken' is better.	Ctrl+I Patch>Matrix>invert InvertCurve
Patch, redisperse columns or rows	Spreads out the vertices evenly in either columns or rows of a patch.	Ctrl+Shift+E Ctrl+E Patch>matrix>redisperse> RedisperseCols RedisperseRows
Patch Thicken	Used on elected patch(es), 'Thicken' creates several patch walls to form a shell to simulate thick multi-surfaced patches.	Ctrl+T Patch>Thicken selected patches ThickenPatch
Patch transpose matrix	Same as invert ??	Ctrl+Shift+M Patch>Matrix>transpose MatrixTranspose
Pillars, cylinders, disks, rods, or pipes: (patches, round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Pillar (round)-shaped Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Pipes, pillars, cylinders, disks, or rods (patches, round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Plate shape Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Player Start move here	Moves Player Start to cursor	RMB orthoview context menu
Pointfile toggle	Uses Pointfile info made by Doom3's dmap command to draw red line from void to first entity to indicate leak path. (see also Next and Previous leak spot.)	File>Pointfile TogglePointfile
Prefab insert	Inserts prefab (group of brushes, models, etc.) as draggable selection. Includes offset to insertion point.	File > Load prefab RMB orthoview context menu LoadPrefab
Prefab save selected	Save selected group of brushes, models, etc. as prefab file. Includes offset to insertion point.	File > Save selected as prefab SaveSelectedAsPrefab
Preferences	Set Dark Radiant preferences. For display colours see Colours.	P Edit>Preferences Preferences
Preview Toggle	Toggles fuller light rendering in camera view closer to in-game but slower so use as needed and toggle off for better performance in Dark Radiant.	F3 TogglePreview
Previous Leak Spot	Moves camera to previous point (further from entity) on a line that winds its way around brushes between an entity and a leak to the void. Repeatedly pressing this moves eventually to the leak. (see also Pointfile.)	Ctrl+Shift+L View>camera>Previous leak spot PrevLeakSpot
Prism brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Project Settings	Select Game settings to specify Doom3 path and mod, eg, darkmod.	P>Preferences>Game Edit>Preferences>Game File>Select Game ProjectSettings
Pyramid-shape brush	Converts selected brush to cone shape of N side faces where N can be 3, 4 (pyramids) to 32	Brush>Cone BrushCone
Recently used maps, open N	Opens most recently used map N where N can be 1 to 11	File>1 to 11 MRUOpenN
Receptron and Source (Stim and Response) Editor	Displays Stim/Response editor. Must have single entity selected.	Entity>Stim/Response StimResponseEditor
Redisperse patch columns or rows	Spreads out the vertices evenly in either columns or rows of a patch.	Ctrl+Shift+E Ctrl+E Patch>matrix>redisperse> RedisperseCols RedisperseRows
Redo	Restores the state prior to the last Undo	Ctrl+Y Edit>Redo Redo
Refresh Models	Reloads all model resources used in map.	File>Refresh models RefreshReferences
Refresh Shaders	Refresh the Texture Browser's list of textures used in current map - removes any unused.	T>Texture Browser>Flush & Reload Shaders Button RefreshShaders
Region Off	Clears region filter to show whole map (except other filters and Hide.)	View>Region>Switch off RegionOff
Region Save	Saves all items in regioned area (see other Region options) as a map file and adds surrounding sealed room brushes and player start at camera position.	File>Save region SaveRegion
Region Set from Brush	Hides all map except region defined by temporary selected brush (brush is deleted.)	View>Region>Set from brush RegionSetBrush
Region Set from Selection	Hides all map except region defined by current selection.	Ctrl+Shift+R View>Region>Set from selection RegionSetSelection
Region Set from XY TOP orthoview	Hides all map except region defined by current XY TOP orthoview. Note this only works if top orthoview displayed not sides.	View>Region>Set RegionSetXY
Reload Models	Reloads all model resources used in map.	File>Refresh models RefreshReferences
Remove Selected	Deletes selected items	BackSpace Edit>Delete DeleteSelection
Render Preview Toggle	Toggles fuller light rendering in camera view closer to in-game but slower so use as needed and toggle off for better performance in Dark Radiant.	F3 TogglePreview
Reparent selected primitives	Assigns selected brush(es) to selected existing entity. Entity must be selected last. Only works with worldspawn primitives; cannot reparent from one entity to another but must first 'revert to worldspawn' in the right click grid view menu	Edit>Reparent primitives ParentSelection
Replace Textures	Replaces all occurrences in the map (or selections) of one texture with another. No default control but you can set a shortcut key. Shows a dialog with inputs for first texture and desired replacement.	FindReplaceTextures
Resize and Rotate Dialog	Displays dialog to rotate and scale (resize) in steps. To rescale a model in Dark Radiant see Rescaling, Resizing, Models in Dark Radiant	Modify>Rotate and scale TransformDialog
Resize Model	To rescale a model in Dark Radiant see Rescaling, Resizing, Models in Dark Radiant
Resize & Move Selection Mode	Mode: Move & Resize Mode cancels, & is cancelled by, Clipper, Rotate & Translate Modes. Move: Drag LMB within selected to move. (may need touch collision model outline) See also other move, nudge, and mouse translate options. Resize: Drag LMB outside of selected brush or patch to/ from face to resize it. Compare also 'Drag Faces'. For models, see Rescaling, Resizing, Models in Dark Radiant	Mode: Key: Q LeftBbar: MouseDrag Useage: LMB-drag
Response and Stim Editor	Displays Stim/Response editor. Must have single entity selected.	Entity>Stim/Response StimResponseEditor
Restore camera Position N	changes camera position to that saved previously with Save position N.	Alt+N (N=0 to 9) LoadPositionN
Reverse patch, invert surface or curve	A patch is one visible textured face even if curved around. This control reverses that face to the other side of the patch, eg, an externally visible dome can become a dome viewed from inside; a pillar becomes the inside of a tube. Can use two patches if both sides needed but 'Thicken' is better.	Ctrl+I Patch>Matrix>invert InvertCurve
Reverse Selected	Clears selected and selects everything that was not selected.In component editing (vertices, edges,) inverts the current component selection only.	I Edt>Invert selection InvertSelection
Revert To Worldspawn	Reverts primitives group entity back to worldspawn	Shift+G Entity>revert group to worldspawn RMB orthoview menu>revert to worldspawn RevertToWorldspawn
Rods, pipes, pillars, disks, or cylinders (patches, round or square)	Creates a pillar, disk, rod, pipe, or cylinder (without ends) textured on the outside (see Invert Patch to reverse or clone and invert for both: a hollow cylinder.) To cap the ends use Cap Selection.	Patch>cylinder (round) Patch>More cylinders>square, dense, very dense cylinders PatchCylinder PatchDenseCylinder PatchSquareCylinder PatchVeryDenseCylinder
Rod-shaped Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Room brushes (CSG)	Replaces a selected brush with multiple brushes to form a hollow shell of the same dimensions. The brushes do not overlap at the corners (compare CSG Hollow.)	LeftBbar: CSGRoom
Rotate func* entity around origin	? ?	TopBbar:
Rotate Mode	Mode: Rotate Mode cancels, & is cancelled by, Move & Resize and Translate Modes. Works on selected: single models or brushes/patches or on multiple selected brushes/patches which will rotate around a common centre. Rotate: LMB-drag within circle to freely rotate in all planes. Caution: brushes/patches may distort badly when snapping to grid during rotation. LMB-drag outside of circle to rotate only in the plane of the axis of view. Compare also Rotate & Scale Dialog	Mode: Key: R LeftBbar: MouseRotate Useage: LMB-drag
Rotate and Resize Dialog	Displays dialog to rotate and scale (resize) in steps. To rescale a model in Dark Radiant see Rescaling, Resizing, Models in Dark Radiant	Modify>Rotate and scale TransformDialog
Rotate Selection X	Rotates the selection clockwise 90° round the X axis	LeftBbar: Modify>Rotate>Rotate X RotateSelectionX
Rotate Selection Y	Rotates the selection clockwise 90° round the Y axis	LeftBbar: Modify>Rotate>Rotate Y RotateSelectionY
Rotate Selection Z	Rotates the selection clockwise 90° round the Z axis	LeftBbar: Modify>Rotate>Rotate Z RotateSelectionZ
Rotation, Free Model Toggle	??	TopBbar: Modify>Free Model Rotation ToggleFreeModelRotation
Rotation Pivot Toggle	??	Ctrl+R ToggleRotationPivot
Round Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Save camera position N	Stores camera position. (restore with Load Position N.)	Ctrl+Alt+N (N=0 to 9) SavePositionN
Save Map	Save current map as map file.	Ctrl+S TopBbar: File>Save SaveMap
Save Map As	Save current map with new name.	File>Save as SaveMapAs
Save Position N of camera	Stores camera position. (restore with Load Position N.)	Ctrl+Alt+N (N=0 to 9) SavePositionN
Save Region	Saves all items in regioned area (see Region options) as a map file and adds surrounding sealed room brushes and player start at camera position.	File>Save region SaveRegion
Save Selected	Saves the current selected items as a map file.	File>Save Selected SaveSelected
Save selected as prefab	Save selected group of brushes, models, etc. as prefab file. Includes offset to insertion point.	File > Save selected as prefab SaveSelectedAsPrefab
Scroll, pan, XYZ Orthoview	Drag the view with RMB. Zoom out first with Delete key or mousewheel to drag faster.	RMB+drag
Select Add/ Subtract multi	Adds or subtracts (select/ deselect) item to/ from any already selected in camera or orthoview.	Shift+LMB
Select Add/ Subtract multi Faces	Adds or subtracts (select/ deselect) faces to/ from any already selected in camera view.	Shift+Ctrl+LMB
Select All Of Type	"Select All of Type" expands the selection to all items of the same type as the current selection. The exact action depends on what exactly is selected. For selected entities: all entities of the same classname are selected. For primitives: the selection is expanded to all items that have the shader that is currently selected in the texture browser. For faces: the selection is expanded to all faces that have the shader that is currently selected in the texture browser.	Shift+A SelectAllOfType
Select all siblings of child.	Selects all primitive children of an entity if one child is selected. Works also with Worldspawn entity.	Ctrl+Alt+E Edit>Expand selection to whole entities ExpandSelectionToEntities
Select children	Deselects entities of selection so only child primitives remain selected.	Edit>Select children SelectChildren
Select Complete Tall	Selects all fully within the area of 2D outline of temporary selected brush in current XYZ orthoview; brush is deleted.	TopBbar: Edit>Select Complete Tall SelectCompleteTall
Select Cycle Face Selection	Cycle Face Selection in camera view ??	Ctrl+Shift+Alt+MMB
Select Edges	Toggles Drag Edges mode. Drag vertices shown on edges. Individual edges of a selected brush can be moved independently to reshape the brush.	E TopBbar: Modify>Components>Edges DragEdges
Select Entities mode	When mode set then only entities can be selected and primitives, non-enitity primitives and patches, cannot be selected.	TopBbar:
Select exclusive & cycle below cursor	Select one item exclusively; any previous selections are deselected. Use Esc to deselect all. Cycles front to back all items below cursor, camera or orthoview, selecting one at a time, deselecting rest.	Shift+Alt+LMB Esc to deselect all
Select Faces	Toggles Drag Faces mode. Similar to Resize but drag vertices shown on brush faces to pull/push the face. Individual faces of a selected brush can be moved independently to resize the brush.	F TopBbar: Modify>Components>Faces DragFaces
Select Game	Select Game settings to specify Doom3 path and mod, eg, darkmod.	P>Preferences>Game Edit>Preferences>Game File>Select Game ProjectSettings
Select Inside	Selects all fully within the volume of temporary selected brush; brush is deleted.	TopBbar: Edit>Select inside SelectInside
Select Partial Tall	Shift LMB drag out a rectangle to toggle selection of items touched by the rectangle in camera or orthoview.	Shift LMB drag
Select Tall, Complete	Selects all fully within the area of 2D outline of temporary selected brush in current XYZ orthoview; brush is deleted.	TopBbar: Edit>Select Complete Tall SelectCompleteTall
Select Tall, Partial	Shift LMB drag out a rectangle to toggle selection of items touched by the rectangle.	Shift LMB drag
Select Touching	Selects all touching the volume of temporary selected brush; brush is deleted.	TopBbar: Edit>Select touching SelectTouching
Select Vertices	Toggles Drag just vertices/else whole brush mode. Enables 'corners of brushes to be moved to reshape brush as against moving whole brush. Caution: Snap to grid and invalidity of concave brush shapes may give unexpected results! Consider also Clipper instead.	TopBbar: V Modify>Components>Vertices DragVertices
Set grid size N	Sets XYZ orthoview grid size to N doom units where N can be 0.125, 0.25, 0.5, 1,2,4, etc doubling up to 256	keys: 1(1) to 9(256) Grid>GridN SetGridN
Settings (Preferences)	Set Dark Radiant preferences. For display colours see Colours.	P Edit>Preferences Preferences
Shortcut keys Command List	Shows list of commands and user-set shortcut keys assigned to them.	Help>Shortcuts List ShowCommandList
Show Angles	Show angles ??	View>Show>Show Angles (also in Preferences>Orthoview) ShowAngles
Show Axes	Show Axes ??	View>Show>Show Axes (also in Preferences>Orthoview) ShowAxes
Show Blocks	Show blocks in XYZ orthoview	View>Show>Show Blocks (also in Preferences>Orthoview) ShowBlocks
Show Camera	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
Show Console	Shows/closes console text info window	O (letter) View>Console view ToggleConsole
Show Command List	Shows list of commands and user-set shortcut keys assigned to them.	Help>Shortcuts List ShowCommandList
Show Coordinates	Show grid coordinates along top and down sides of XYZ orthoview grid. Coordinates of items in the grid see Size Info. Cursor coordinates are in status bar.	View>Show>Show Coordinates ShowCoordinates
Show Crosshairs	Toggle Crosshairs (grid) on and off	Shift+X Edit>Preferences>Orthoview ToggleCrosshairs
Show entity Inspector	Shows/closes entity inspector with entity properties	N View>Entity inspector ToggleEntityInspector
Show Hidden	Shows hidden items. Reveals ALL hidden items. (See Hide)	Shift+H View > Hide/Show ShowHidden
Show In Use	??	ShowInUse
Show Lights Radii	Shows/hides the area covered by every light.	Ctrl+Alt+Shift+F TopBbar: ToggleShowAllLightRadii
Show Names	Shows entity names in XYZ orthoview	View>Show>Show Names (also in Preferences>Orthoview) ShowNames
Show texture browser	Shows/closes texture browser window	T View>Texture browser ViewTextures
Show Window Outline	Shows Window Outline ??	View>Show>Show Window Outline ShowWindowOutline
Show Workzone	Shows hilighted grid lines in XYZ orthoview centred on and outlining selection and extending outwards. Use for locating selection, alignment, etc. with other items	View>Show>Show Workzone (also in Preferences>Orthoview) ShowWorkzone
Sides of Brush, change number	Convert selected brush to be N-sided	Ctrl+N Brush[N]Sided
Simple Patch Mesh	Creates a flat rectangular patch its texture surface facing out the XYZ orthoview. If a single brush was already selected then a patch is created of the same texture and area as the face in the XYZ view and the brush is optionally deleted. If multiple brushes were selected then a patch is created to form a rectangular boundary around them and the brushes remain.	Shift+P Patch>Simple patch mesh SimplePatchMesh
Size Info and coordinates of Selected Toggle	Shows size info and coordinates of selected in XYZ orthoview	View>Show>Show size info (also in Preferences>Orthoview) ToggleShowSizeInfo
Name Toggle	Shows/hides all entity names in XYZ orthoview	ShowNames
Slice brush	See Clipper Mode
Snap To Grid	Snaps selected to grid.	Ctrl+G LeftBbar: Grid>snap selected to grid SnapToGrid
Sound (speaker), create	Creates speaker. See Adding ambient Sounds to your Map	RMB orthoview context menu
Source and Receptron (Stim and Response) Editor	Displays Stim/Response editor. Must have single entity selected.	Entity>Stim/Response StimResponseEditor
Speaker, create	Creates speaker. See Adding ambient Sounds to your Map	RMB orthoview context menu
Sphere-shaped brush	Converts selected brush to sphere shape of N&#178 faces where N can be 3 (9 faces) to 7 (49 faces.)	Brush>sphere BrushSphere
Split Selected Clip	As for Clip Selected but splits brush into two sections, preserving both, rather than clips off and discards one of them.	Shift+Return Brush>Clipper>Clip Selection SplitSelected
Stim and Response Editor	Displays Stim/Response editor. Must have single entity selected.	Entity>Stim/Response StimResponseEditor
Stitch Patch Texture	This command tries to make the texture transition of two selected patches seamless.	StitchPatchTexture
Store Position N of camera	Stores camera position. (restore with Load Position N.)	Ctrl+Alt+N (N=0 to 9) SavePositionN
Subtract brushes (CSG)	Uses selected brush(es) as a template to 'subtract' from any overlapping UNselected target brush(es). If necessary the target is replaced with multiple brushes. The brushes do not overlap at the corners. The originally selected brush template is still selected and not destroyed.	Shift+U LeftBbar: CSGSubtract
Surface Inspector of texture properties	Control texture shift, scale, rotation, flipping (mirroring) and texture lock to stop changes when brush moved.	S View>Surface inspector SurfaceInspector

T to Z

DARK RADIANT CONTROLS
CONTROL	DESCRIPTION	DEFAULT KEY TOOLBAR MENU ROUTE SHORTCUT NAME
Texture Browser (chosen textures)	Shows/closes texture browser window with previously chosen textures (see also media browser for all.)	T View>Texture browser ViewTextures
Texture Media browser (all textures)	Browse all available textures (see also texture browser for previously chosen.)	Select media tab on inspector panel (use T for texture browser first if panel not showing.)
Texture copy	Copies texture from single selected face or patch to Dark Radiant's shader clipboard.	Edit>Copy shader CopyShader
Texture Find and Replace	Replaces all occurrences in the map (or selections) of one texture with another. No default control but you can set a shortcut key. Shows a dialog with inputs for first texture and desired replacement.	FindReplaceTextures
Texture Lock	Toggles texture lock mode which keeps an applied texture aligned relative to its surface rather than the world map when the selection is moved.	Shift+T or S>Surface Inspector TopBbar: Brush>Texture lock TogTexLock
Texture paste	Pastes texture from Dark Radiant's shader clipboard to selected items.	Edit>Paste shader PasteShader
Texture Paste Natural	Pastes texture from Dark Radiant's shader clipboard to selected items adjusting plane distortions - see DarkRadiant - Paste Texture Natural for details.	Shift+Middle mouse button PasteShaderNatural
Texture properties Surface Inspector	Control texture shift, scale, rotation, flipping (mirroring) and texture lock to stop changes when brush moved.	S View>Surface inspector SurfaceInspector
Texture Rotate	Rotates the selected texture clockwise or counter-clockwise in the steps set for rotation in Surface Inspector	Shift+Page_Down TexRotateClock Alt+Page_Up TexRotateCounter
Texture Scale	Scales the selected texture in the steps set for scale in Surface Inspector.	Ctrl+Up/Down/Left/Right TexScaleUp TexScaleDown TexScaleLeft TexScaleRight
Texture Shift (alignment scroll)	Shifts (scrolls) the selected texture in the steps set for scale in Surface Inspector.	Shift+Up/Down/Left/Right TexShiftUp TexShiftDown TexShiftLeft TexShiftRight
Texture Tool	Toggle show/hide Texture Tool, an enhanced texture alignment tool (see Texture Tool)	Ctrl+Alt+T View>Texture Tool TextureTool
Texture Tool Flip S	see Texture Tool	TexToolFlipS
Texture Tool Flip T	see Texture Tool	TexToolFlipT
Texture Tool Grid Down	see Texture Tool	Shift+minus TexToolGridDown
Texture Tool Grid Up	see Texture Tool	Shift+plus TexToolGridUp
Texture Tool Merge Items	see Texture Tool	Alt+M TexToolMergeItems
Texture Tool Select Related	see Texture Tool	TexToolSelectRelated
Texture Tool Snap To Grid	see Texture Tool	Ctrl+Shift+G TexToolSnapToGrid
Texture Tool Toggle Grid	see Texture Tool	TexToolToggleGrid
Texture Natural	Sets selected texture to default: 0 shift & rotation & scale 0.25(varies??)	Ctrl+N TextureNatural
Thicken Patch	Used on elected patch(es), 'Thicken' creates several patch walls to form a shell to simulate thick multi-surfaced patches.	Ctrl+T Patch>Thicken selected patches ThickenPatch
Transform Dialog	Displays dialog to rotate and scale in steps.	Modify>Rotate and scale TransformDialog
Translate (Move, Drag) in one plane (Mode)	Mode: Move (Translate) Mode cancels, & is cancelled by, Clipper, Rotate, Move & Resize Modes. Useage: In camera or orthoview, LMB any side of selection and origin pointer for that plane turns yellow. Then either side or within selection in that plane, LMB will drag only in that plane preventing sideslip. Compare also alternative 'Nudge', and 'Move (drag) selection in one plane' which are not locked modes.	W LeftBbar: MouseTranslate
Transpose, patch matrix	Same as invert ??	Ctrl+Shift+M Patch>Matrix>transpose MatrixTranspose
Triangular Brush	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Undo	Undo the last actual change (does not undo selections.) Number of undo's set in Preferences.	Ctrl+Z Edit>Undo Undo
Ungroup Selection	??	UngroupSelection
Unselect Selected	Unselect selected. In component editing, unselects components on first use, switches back to primitive mode on second, and unselects all primitives on third.	Esc Edit>Clear Selection UnSelectSelection
Up Floor	Moves camera up to next horizontal brush surface	Page_Up View>camera>up floor UpFloor
Vertices Drag Toggle	Toggles Drag Vertices mode. Enables vertices of brushes and patches to be moved individually to reshape brush, and origins of torches, etc. Caution: Snap to grid and invalidity of concave brush shapes may give unexpected results! Consider also Clipper instead.	V Top Toolbar Modify>Components> Vertices DragVertices
View Camera	Shows/closes camera view window	Ctrl+Shift+C View>Camera view ToggleCamera
View Console	Shows/closes console text info window	O (letter) View>Console view ToggleConsole
View Entity Inspector	Shows/closes entity inspector with entity properties	N View>Entity inspector ToggleEntityInspector
View Entity List	Toggles show/hide list of all entities in the map. Can select.	L View>entity list EntityList
View Front		ViewFront
View Side		ViewSide
View texture (chosen) browser	Shows/closes texture browser window with previously chosen textures (see also media browser for all.)	T View>Texture browser ViewTextures
View Texture (all) Media browser	Browse all available textures (see also texture browser for previously chosen.)	Select media tab on inspector panel (use T for texture browser first if panel not showing.)
View Texture Tool	Toggle show/hide texture tool.	Ctrl+Alt+T View>Texture Tool TextureTool
View Top	??	ViewTop
Wallpaper Background Image	Sets background image as wallpaper in XYZ orthoview	View>background image
Wedge brush (prism)	Converts selected brush to two opposing faces with N-faced edge between where N must be 3 (wedge) or greater (large numbers effectly produce a disk.)	Brush>prism BrushPrism
Workzone gridlines show	Shows hilighted grid lines in XYZ orthoview centred on and outlining selection and extending outwards. Use for locating selection, alignment, etc. with other items	View>Show>Show Workzone (also in Preferences>Orthoview) ShowWorkzone
Worldspawn, revert to	Reverts primitives group entity back to worldspawn	Shift+G Entity>revert group to worldspawn RMB orthoview menu>revert to worldspawn RevertToWorldspawn
XYZ Orthoview scroll, pan	Drag the view with RMB. Zoom out first with Delete key or mousewheel to drag faster.	RMB+drag
XYZ Orthoview window creation	Creates new XYZ Orthoview window	Ctrl+Alt+N View>New XY view NewOrthoView
Zoom 100%	Set normal 100% zoom in XYZ orthoviews.	View>Orthoview>Zoom 100% Zoom100
Zoom In	Zooms in on all XYZ orthoviews	View>Orthoview>Zoom in Delete or mouse wheel or Shift+RMB+drag forward ZoomIn
Zoom Out	Zooms out on all XYZ orthoviews	View>Orthoview>Zoom out Insert or mouse wheel or Shift+RMB+drag backward ZoomOut

How to Edit or Add to the Table of Controls

Instruction on how to edit this table can be found on the Discussion page.